# Adjustable ArcDroid height for material other than plate

**URL:** <https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781>\
**Category:** Gallery\
**Created:** [May 20, 2023, 3:46pm UTC](https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781 "2023-05-20T15:46:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cmsmoke](https://avatars.discourse-cdn.com/v4/letter/c/d78d45/32.png) [@Cmsmoke](https://forum.arcdroidcnc.com/u/Cmsmoke)\
**Post date:** [May 20, 2023, 3:46pm UTC](https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781/1 "2023-05-20T15:46:20Z")

</div>

Geantvert asked for photos of my adjustable height solution, so here it is…It will go over 12”. I have a pin that can be changed on the bottom of the jack that gains 2” and the height of the head of the ArcDroid itself can give some more. I may not use it often, but I wanted that option. I retrofitted this table. It stays outside. The ArcDroid locates on the posts. One small clamp will hold it down.

 ![IMG_0480](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/5dca86ca33a1150e7e96034ae0784394712a5f13.jpeg)  
 ![IMG_0481](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/4687a00c6d553176029ec6ea25e9b3a856e86fb7.jpeg)  
 ![IMG_0482](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/950ae59fe2781d726ee4914bcfebf9970191414c.jpeg)

---

<div class="post-metadata">

**Author:** ![Geantvert](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/geantvert/32/664_2.png) [@Geantvert](https://forum.arcdroidcnc.com/u/Geantvert)\
**Post date:** [May 20, 2023, 4:33pm UTC](https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781/2 "2023-05-20T16:33:21Z")

</div>

great, thanks for sharing. I hadn’t imagined it like that. very interesting…👍👍👍

---

<div class="post-metadata">

**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\
**Post date:** [May 21, 2023, 12:49am UTC](https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781/3 "2023-05-21T00:49:30Z")

</div>

@Cmsmoke That’s a pretty slick set up. Must have been a bit tough getting the rails aligned properly. Keep them greased up so the weather doesn’t eat’m up.

---

<div class="post-metadata">

**Author:** ![ModEOsMetalworx](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/modeosmetalworx/32/278_2.png) [@ModEOsMetalworx](https://forum.arcdroidcnc.com/u/ModEOsMetalworx)\
**Post date:** [May 28, 2023, 2:17pm UTC](https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781/4 "2023-05-28T14:17:11Z")

</div>

Nice. That’s kind of like the second table I’d made months ago. It’s adjustable in 1 inch increments. Up to 3 inches. Unlike yours (which I like for larger material), the grates, itself(not the frame), are where the adjustments can be made. Nice job.

---

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [June 13, 2023, 10:55pm UTC](https://forum.arcdroidcnc.com/t/adjustable-arcdroid-height-for-material-other-than-plate/2781/5 "2023-06-13T22:55:08Z")

</div>

That is so cool to bad I invested in my set up if it ever quits raining and I can put it together lol