# Another Newbie

**URL:** <https://forum.arcdroidcnc.com/t/another-newbie/4296>\
**Category:** General Discussion\
**Created:** [July 3, 2024, 4:08am UTC](https://forum.arcdroidcnc.com/t/another-newbie/4296 "2024-07-03T04:08:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ext909](https://avatars.discourse-cdn.com/v4/letter/e/d26b3c/32.png) [@Ext909](https://forum.arcdroidcnc.com/u/Ext909)\
**Post date:** [July 3, 2024, 4:08am UTC](https://forum.arcdroidcnc.com/t/another-newbie/4296/1 "2024-07-03T04:08:33Z")

</div>

Well, first time to post anything on the Internet.  
Got my Arcdroid, built table,set up and got running.  
I think this is going to be one of the best tools I’ve bought in years.  
Been a machinist and fabricator for years.  
I know I will be asking ignorant questions before long so be patient please.  
Thanks for such a good machine and a good forum for information.

---

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [July 3, 2024, 5:37am UTC](https://forum.arcdroidcnc.com/t/another-newbie/4296/2 "2024-07-03T05:37:32Z")

</div>

welcome from Indiana ask away

---

<div class="post-metadata">

**Author:** ![Ext909](https://avatars.discourse-cdn.com/v4/letter/e/d26b3c/32.png) [@Ext909](https://forum.arcdroidcnc.com/u/Ext909)\
**Post date:** [July 3, 2024, 5:39pm UTC](https://forum.arcdroidcnc.com/t/another-newbie/4296/3 "2024-07-03T17:39:18Z")

</div>

No ignorant questions at the moment, but I am starting a car wash coin box project.  
So I am sure they will come.  
Going to build the first one out of HR sheet instead of SS.  
SS has gotten so expensive, I can’t afford to make many mistakes when using it.  
I am very grateful for this site with so much information.  
Thanks to all the people who post here.
