# Arcdroid/Fusion360 Question

**URL:** <https://forum.arcdroidcnc.com/t/arcdroid-fusion360-question/5068>\
**Category:** General Discussion\
**Created:** [March 3, 2025, 7:51pm UTC](https://forum.arcdroidcnc.com/t/arcdroid-fusion360-question/5068 "2025-03-03T19:51:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brad](https://avatars.discourse-cdn.com/v4/letter/b/59ef9b/32.png) [@Brad](https://forum.arcdroidcnc.com/u/Brad)\
**Post date:** [March 3, 2025, 7:51pm UTC](https://forum.arcdroidcnc.com/t/arcdroid-fusion360-question/5068/1 "2025-03-03T19:51:26Z")

</div>

Good afternoon  
I have had my Ad for about 10 months now and I love it. I am now trying to get fusion 360 set up. So where do I downloaded Arcdroid processing file to the stick/screen or card/arm part ? Iam just not to experienced with all this technology. LOL

---

<div class="post-metadata">

**Author:** ![Devin604](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Devin604](https://forum.arcdroidcnc.com/u/Devin604)\
**Post date:** [March 4, 2025, 12:17am UTC](https://forum.arcdroidcnc.com/t/arcdroid-fusion360-question/5068/2 "2025-03-04T00:17:06Z")

</div>

(1) Draw out your part in fusion.

(2) in fusion go to manufacture and click on appropriate settings like - plasma cutter, and which parts you want cut out and the applicable settings like which side you want the kerf on and such. Run a simulation test in fusion just to make sure it’s what you want.

(3) save the file to your usb stick using gcode.

(4) plug usb stick back into arcdroid

(5) click on the file icon in you’re arcdroid and find your file. Click on your file and import it to the screen.

(6) adjust your machine settings. run the machine

Enjoy!