# Arcdroid not finishing cuts

**URL:** <https://forum.arcdroidcnc.com/t/arcdroid-not-finishing-cuts/6044>\
**Category:** General Discussion\
**Created:** [July 25, 2026, 7:11am UTC](https://forum.arcdroidcnc.com/t/arcdroid-not-finishing-cuts/6044 "2026-07-25T07:11:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hoopmjs](https://avatars.discourse-cdn.com/v4/letter/h/439d5e/32.png) [@Hoopmjs](https://forum.arcdroidcnc.com/u/Hoopmjs)\
**Post date:** [July 25, 2026, 7:11am UTC](https://forum.arcdroidcnc.com/t/arcdroid-not-finishing-cuts/6044/1 "2026-07-25T07:11:01Z")

</div>

Greetings, just started messing around with a new arcdroid and I am having some trouble with the machine not finishing some cuts.

 ![20260725_155218](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/1/1bf478b9cdd3e36e25ac32728c014918915b93e4.jpeg)

The 2 cuts out fine but the 1 and the 4 and the ouside border finish short of the lead in.

Tried cuuting some shapes in simple trace and all cut fine.

Anybody else seen this problem?