# Auto level (20 letters)

**URL:** https://forum.arcdroidcnc.com/t/auto-level-20-letters/3214
**Category:** Tips and Tricks
**Created:** [August 25, 2023, 7:45pm UTC](https://forum.arcdroidcnc.com/t/auto-level-20-letters/3214 "2023-08-25T19:45:02Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)
#### Post date: [August 25, 2023, 7:45pm UTC](https://forum.arcdroidcnc.com/t/auto-level-20-letters/3214/1 "2023-08-25T19:45:02Z")

</div>

Auto level is not limited to flat steel I used it to cut angle iron to make a square backstop to help square my work my Droid is on shims. I had to cut out a slot to home

 ![thumbnail](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/de5fabd92f5a47d9b3c2c0e1d435dd235e028e0c.jpeg)  
 ![thumbnail (1)](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/63c07c1cace06fe428c03acc02f2a5288d544d14.jpeg)  
my Droid