# Cad File not centering on screen of droid **URL:** \ **Category:** General Discussion\ **Created:** [December 27, 2022, 8:42pm UTC](https://forum.arcdroidcnc.com/t/cad-file-not-centering-on-screen-of-droid/628 "2022-12-27T20:42:01Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![vern](https://avatars.discourse-cdn.com/v4/letter/v/35a633/32.png) [@vern](https://forum.arcdroidcnc.com/u/vern)\ **Post date:** [December 27, 2022, 8:42pm UTC](https://forum.arcdroidcnc.com/t/cad-file-not-centering-on-screen-of-droid/628/1 "2022-12-27T20:42:01Z")
so I have a fusion 360 cad file, I imported it to the droid but it isn’t in a workable area (the cut path is past droid home) how do I get it in the center of the material or in an area that I can stack multiple to cut? this will be the first cut after getting it all together and calibrated! very excited ---
**Author:** ![Joatmon](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/joatmon/32/1201_2.png) [@Joatmon](https://forum.arcdroidcnc.com/u/Joatmon)\ **Post date:** [October 27, 2023, 11:23pm UTC](https://forum.arcdroidcnc.com/t/cad-file-not-centering-on-screen-of-droid/628/2 "2023-10-27T23:23:56Z")
You can move the stylus around and reset “0” and it moves part.also can move with origin… Hope this helps ---
**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\ **Post date:** [October 30, 2023, 3:57pm UTC](https://forum.arcdroidcnc.com/t/cad-file-not-centering-on-screen-of-droid/628/3 "2023-10-30T15:57:31Z")
@vern You need to reset the origin WRT your drawing If importing a dxf one of the options inthe import dialog is “origin” tap that on until the drawing ois lined up as you like If Bringing in G-code you can do the same thing by going to trace and choosing the transform button. ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/9c0a4b3322d38425124bb96ead2032686be12034.png)