# Calibration steps **URL:** \ **Category:** Tips and Tricks\ **Created:** [June 18, 2023, 8:35am UTC](https://forum.arcdroidcnc.com/t/calibration-steps/2999 "2023-06-18T08:35:21Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![LucD-B](https://avatars.discourse-cdn.com/v4/letter/l/7ea924/32.png) [@LucD-B](https://forum.arcdroidcnc.com/u/LucD-B)\ **Post date:** [June 18, 2023, 8:35am UTC](https://forum.arcdroidcnc.com/t/calibration-steps/2999/1 "2023-06-18T08:35:21Z")
Is there a possibility to go one step back when I mess up during calibration? I’ve had it a few times and always start back from the top with the calibration. But if it’s a small thing, like the shuttle that comes of the rail or the torch that loses contact with the shuttle it would be usefull if you could just go back one step. ---
**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\ **Post date:** [June 18, 2023, 1:54pm UTC](https://forum.arcdroidcnc.com/t/calibration-steps/2999/2 "2023-06-18T13:54:33Z")
I do not believe you can. You have to do the process from the beginning to the end. You’ll get real good at it eventually! ---
**Author:** ![LucD-B](https://avatars.discourse-cdn.com/v4/letter/l/7ea924/32.png) [@LucD-B](https://forum.arcdroidcnc.com/u/LucD-B)\ **Post date:** [June 18, 2023, 2:08pm UTC](https://forum.arcdroidcnc.com/t/calibration-steps/2999/3 "2023-06-18T14:08:11Z")
I’m getting good at it. But because I work with students I thought it could be an interesting feature. ---
**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\ **Post date:** [June 19, 2023, 1:12pm UTC](https://forum.arcdroidcnc.com/t/calibration-steps/2999/4 "2023-06-19T13:12:32Z")
@LucD-B Interesting thought…we’ll add it to the Queue as a possible update Cheers AM