# Cut path issues

**URL:** https://forum.arcdroidcnc.com/t/cut-path-issues/134
**Category:** Gallery
**Created:** [November 20, 2022, 3:16am UTC](https://forum.arcdroidcnc.com/t/cut-path-issues/134 "2022-11-20T03:16:28Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Tom](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tom](https://forum.arcdroidcnc.com/u/Tom)
#### Post date: [November 20, 2022, 3:16am UTC](https://forum.arcdroidcnc.com/t/cut-path-issues/134/1 "2022-11-20T03:16:28Z")

</div>

![1000000511](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/6c4fa94b75580b13cf9cac541fec3d3f034a587a.jpeg)

---

<div class="post-metadata">

### Author: ![tylorabel](https://avatars.discourse-cdn.com/v4/letter/t/46a35a/32.png) [@tylorabel](https://forum.arcdroidcnc.com/u/tylorabel)
#### Post date: [November 20, 2022, 6:34pm UTC](https://forum.arcdroidcnc.com/t/cut-path-issues/134/2 "2022-11-20T18:34:48Z")

</div>

Maybe some not closed loops

---

<div class="post-metadata">

### Author: ![Jim](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/jim/32/118_2.png) [@Jim](https://forum.arcdroidcnc.com/u/Jim)
#### Post date: [November 21, 2022, 12:15am UTC](https://forum.arcdroidcnc.com/t/cut-path-issues/134/3 "2022-11-21T00:15:38Z")

</div>

I have had something similar a couple times. Restarting software and doing the gcode again and it went away.

---

<div class="post-metadata">

### Author: ![Tom](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tom](https://forum.arcdroidcnc.com/u/Tom)
#### Post date: [November 21, 2022, 12:40am UTC](https://forum.arcdroidcnc.com/t/cut-path-issues/134/4 "2022-11-21T00:40:54Z")

</div>

Hi Jim.  
When you say restart the software, what exactly do you mean?  
Turn it off and on again, or more of a reset?

Thanks.

---

<div class="post-metadata">

### Author: ![Jim](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/jim/32/118_2.png) [@Jim](https://forum.arcdroidcnc.com/u/Jim)
#### Post date: [November 21, 2022, 12:56am UTC](https://forum.arcdroidcnc.com/t/cut-path-issues/134/5 "2022-11-21T00:56:07Z")

</div>

I was using Fusion 360. Basically just closed/opened app and did the gcode export again. Probably restarted the 'Droid too.

start over with a couple very simple drawings so that you have a chance to read the gcode in a text editor and the gcode is simple enough to comprehend that it looks “right” or if something looks really weird with extraneous code.