# Cut window pattern

**URL:** <https://forum.arcdroidcnc.com/t/cut-window-pattern/5650>\
**Category:** General Discussion\
**Created:** [November 16, 2025, 1:47am UTC](https://forum.arcdroidcnc.com/t/cut-window-pattern/5650 "2025-11-16T01:47:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![wildman](https://avatars.discourse-cdn.com/v4/letter/w/f4b2a3/32.png) [@wildman](https://forum.arcdroidcnc.com/u/wildman)\
**Post date:** [November 16, 2025, 1:47am UTC](https://forum.arcdroidcnc.com/t/cut-window-pattern/5650/1 "2025-11-16T01:47:53Z")

</div>

does anyone have a “cut window” pattern for the machine? It would be immensely helpful when designing on cad.

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [November 20, 2025, 4:12pm UTC](https://forum.arcdroidcnc.com/t/cut-window-pattern/5650/2 "2025-11-20T16:12:58Z")

</div>

This should help

 ![cutting area inch](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/a/a7ad881bc804964aea999b226ba3fb1ac5a5f775.png)

---

<div class="post-metadata">

**Author:** ![wildman](https://avatars.discourse-cdn.com/v4/letter/w/f4b2a3/32.png) [@wildman](https://forum.arcdroidcnc.com/u/wildman)\
**Post date:** [November 28, 2025, 8:04pm UTC](https://forum.arcdroidcnc.com/t/cut-window-pattern/5650/3 "2025-11-28T20:04:22Z")

</div>

Thanks Andrew. I didn’t notice that you had posted this but very helpful.

---

<div class="post-metadata">

**Author:** ![wildman](https://avatars.discourse-cdn.com/v4/letter/w/f4b2a3/32.png) [@wildman](https://forum.arcdroidcnc.com/u/wildman)\
**Post date:** [November 28, 2025, 8:06pm UTC](https://forum.arcdroidcnc.com/t/cut-window-pattern/5650/4 "2025-11-28T20:06:42Z")

</div>

I made one by doing a simple trace and exporting to DXF. (btw to export to dxf and not gcode, “long hold” the save button). You actually have more area (see reply below) but the way I have my machine mounted, I lose about an inch next to the machine.

[ARCDROID ENVELOPE.dxf](https://forum.arcdroidcnc.com/uploads/short-url/ap7eBxq44cgKlOxinIgRYVRULjq.dxf) (37.0 KB)