# Cutting pieces in the same position

**URL:** <https://forum.arcdroidcnc.com/t/cutting-pieces-in-the-same-position/3084>\
**Category:** Tips and Tricks\
**Created:** [July 16, 2023, 7:59pm UTC](https://forum.arcdroidcnc.com/t/cutting-pieces-in-the-same-position/3084 "2023-07-16T19:59:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![idelcespedesk](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/idelcespedesk/32/228_2.png) [@idelcespedesk](https://forum.arcdroidcnc.com/u/idelcespedesk)\
**Post date:** [July 16, 2023, 7:59pm UTC](https://forum.arcdroidcnc.com/t/cutting-pieces-in-the-same-position/3084/1 "2023-07-16T19:59:25Z")

</div>

Now I’m using all the surplus from my projects, making small fixtures for home. I start whit a big saver space shoes rack.  
The issue here is, I need to cut the same piece a lot of time, the design have 3 3/4 wide and my flat bar 4 inch.  
I need to fix the raw piece in a known position, because I have just an 1/8 for cutting space  
Resuming, I cut this square and resulted a big help

 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/4f184040836f593e0dc1ff0c793ed516975e8f26.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/4442aed1914f8db270948678749fcb7417fcb2c7.jpeg)  
The center of the circle is in -200, 150 mm.  
[[July 16, 2023 - YouTube](https://youtu.be/gTPuJC1gZyM)]

---

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [September 2, 2023, 2:57pm UTC](https://forum.arcdroidcnc.com/t/cutting-pieces-in-the-same-position/3084/2 "2023-09-02T14:57:50Z")

</div>

What kind of clamp are you using?