# Drawing import issues

**URL:** https://forum.arcdroidcnc.com/t/drawing-import-issues/133
**Category:** General Discussion
**Created:** [November 20, 2022, 3:00am UTC](https://forum.arcdroidcnc.com/t/drawing-import-issues/133 "2022-11-20T03:00:18Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Tom](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tom](https://forum.arcdroidcnc.com/u/Tom)
#### Post date: [November 20, 2022, 3:00am UTC](https://forum.arcdroidcnc.com/t/drawing-import-issues/133/1 "2022-11-20T03:00:18Z")

</div>

Hi all.  
I’m having some unusual issues when I import a drawing.  
I’m using librecad, which works just fine, I save the file I want onto the USB, then when I open the file on the ArcDroid UI there will be heaps of extra unwanted tool paths added, usually arcing back to 0,0

Has anyone run into similar problems?

Thanks.  
Tom.

---

<div class="post-metadata">

### Author: ![tylorabel](https://avatars.discourse-cdn.com/v4/letter/t/46a35a/32.png) [@tylorabel](https://forum.arcdroidcnc.com/u/tylorabel)
#### Post date: [November 20, 2022, 6:38pm UTC](https://forum.arcdroidcnc.com/t/drawing-import-issues/133/2 "2022-11-20T18:38:08Z")

</div>

If you open librecad and just draw a circle and transfer it over what happens? Whats the export format from librecad?

---

<div class="post-metadata">

### Author: ![Tom](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tom](https://forum.arcdroidcnc.com/u/Tom)
#### Post date: [November 21, 2022, 5:51am UTC](https://forum.arcdroidcnc.com/t/drawing-import-issues/133/3 "2022-11-21T05:51:41Z")

</div>

Hi.  
I’ve bought a new USB, and I’ve completed all the latest updates.  
Things are going much better now.