# Etsy download Fail

**URL:** <https://forum.arcdroidcnc.com/t/etsy-download-fail/4313>\
**Category:** General Discussion\
**Created:** [July 8, 2024, 10:35pm UTC](https://forum.arcdroidcnc.com/t/etsy-download-fail/4313 "2024-07-08T22:35:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![BAYER](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/bayer/32/1455_2.png) [@BAYER](https://forum.arcdroidcnc.com/u/BAYER)\
**Post date:** [July 8, 2024, 10:35pm UTC](https://forum.arcdroidcnc.com/t/etsy-download-fail/4313/1 "2024-07-08T22:35:34Z")

</div>

Hi All, New to the site!!  
Can someone try this download this dxf file and let me know if it will work for you or tell me what I am doing wrong??? Thank you!!!  
[CADtsyAirHoseHolder.dxf](https://forum.arcdroidcnc.com/uploads/short-url/1D1nAWMHAxaF1JZmMukYDJx4NFb.dxf) (361.1 KB)

---

<div class="post-metadata">

**Author:** ![KenM](https://avatars.discourse-cdn.com/v4/letter/k/bc79bd/32.png) [@KenM](https://forum.arcdroidcnc.com/u/KenM)\
**Post date:** [July 9, 2024, 1:21am UTC](https://forum.arcdroidcnc.com/t/etsy-download-fail/4313/2 "2024-07-09T01:21:27Z")

</div>

Bayer,  
What are you seeing? File too large? Not in front of my ArcDroid at the moment.

---

<div class="post-metadata">

**Author:** ![KenM](https://avatars.discourse-cdn.com/v4/letter/k/bc79bd/32.png) [@KenM](https://forum.arcdroidcnc.com/u/KenM)\
**Post date:** [July 9, 2024, 1:23am UTC](https://forum.arcdroidcnc.com/t/etsy-download-fail/4313/3 "2024-07-09T01:23:32Z")

</div>

Also when i load it in EstlCam I am seeing these lines that go thru your fold points. I am pretty sure this would cause issues

 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/6/65f1bd8b89861a7b2f2f0cd8c577fc83aaf3297b.png)

---

<div class="post-metadata">

**Author:** ![KenM](https://avatars.discourse-cdn.com/v4/letter/k/bc79bd/32.png) [@KenM](https://forum.arcdroidcnc.com/u/KenM)\
**Post date:** [July 9, 2024, 1:30am UTC](https://forum.arcdroidcnc.com/t/etsy-download-fail/4313/4 "2024-07-09T01:30:46Z")

</div>

I had a moment and went ahead and removed those bend mark lines. Here is a new DXF and metric ArcDroid gcode with fixed lead ins.  
[CADtsyAirHoseHolder.gcode](https://forum.arcdroidcnc.com/uploads/short-url/85v98MZhcawmJowFrds8RJ4q1V7.gcode) (10.6 KB)  
[CADtsyAirHoseHolder.dxf](https://forum.arcdroidcnc.com/uploads/short-url/88cFL5RpHgi1W7NarmukJTbZzXh.dxf) (105.5 KB)

Disclaimer! I didn’t test so do a dry run first!

 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/4/475b3e41de741a7e31f0a1c8a957a4973183da3a.png)

---

<div class="post-metadata">

**Author:** ![BAYER](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/bayer/32/1455_2.png) [@BAYER](https://forum.arcdroidcnc.com/u/BAYER)\
**Post date:** [July 9, 2024, 11:30pm UTC](https://forum.arcdroidcnc.com/t/etsy-download-fail/4313/5 "2024-07-09T23:30:09Z")

</div>

KenM, Thank you so much!!! I will give it a try and let you know how I make out.

This forum and the people on it are great!!! Thank you!