# Feed back on Everlast Plasma cutter

**URL:** https://forum.arcdroidcnc.com/t/feed-back-on-everlast-plasma-cutter/5162
**Category:** General Discussion
**Created:** [April 3, 2025, 3:14pm UTC](https://forum.arcdroidcnc.com/t/feed-back-on-everlast-plasma-cutter/5162 "2025-04-03T15:14:15Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Brad](https://avatars.discourse-cdn.com/v4/letter/b/59ef9b/32.png) [@Brad](https://forum.arcdroidcnc.com/u/Brad)
#### Post date: [April 3, 2025, 3:14pm UTC](https://forum.arcdroidcnc.com/t/feed-back-on-everlast-plasma-cutter/5162/1 "2025-04-03T15:14:15Z")

</div>

I am in the midst of going to buy a new plasma cutting machine. I have been looking at the Everlast 62i and 82i, more so the 82i. I presently have a Hyphertherm 30. Nice machine, just to small for the future jobs in mind. To buy a bigger amperage Hypertherm machine is just to expensive of a machine to buy.  
I would like some feedback on the Everlast 62i and 82i if possible.

Thanks

---

<div class="post-metadata">

### Author: ![arcnc](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@arcnc](https://forum.arcdroidcnc.com/u/arcnc)
#### Post date: [April 7, 2025, 7:35pm UTC](https://forum.arcdroidcnc.com/t/feed-back-on-everlast-plasma-cutter/5162/2 "2025-04-07T19:35:23Z")

</div>

I have an 82I I’ve been impressed with it. Have cut up to one inch with the arcdroid without issue. May be able to cut thicker material I don;t know, haven’t tried. The time or two I’ve had questions and called customer service they have been available and helpful. I’d recommend them and would buy again. Had mine for over a year now and no issues.

---

<div class="post-metadata">

### Author: ![Brad](https://avatars.discourse-cdn.com/v4/letter/b/59ef9b/32.png) [@Brad](https://forum.arcdroidcnc.com/u/Brad)
#### Post date: [April 8, 2025, 10:18pm UTC](https://forum.arcdroidcnc.com/t/feed-back-on-everlast-plasma-cutter/5162/3 "2025-04-08T22:18:09Z")

</div>

What do you use the hand held torch or the machine torch ?  
Thanks

---

<div class="post-metadata">

### Author: ![Bigjimbo](https://avatars.discourse-cdn.com/v4/letter/b/d07c76/32.png) [@Bigjimbo](https://forum.arcdroidcnc.com/u/Bigjimbo)
#### Post date: [April 8, 2025, 10:57pm UTC](https://forum.arcdroidcnc.com/t/feed-back-on-everlast-plasma-cutter/5162/4 "2025-04-08T22:57:40Z")

</div>

I have 82i with machine torch works great would highly recommend Everlast and their customer service