# Finally made my 1st cuts today

**URL:** <https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768>\
**Category:** Gallery\
**Created:** [January 9, 2024, 9:10pm UTC](https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768 "2024-01-09T21:10:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ggreen702](https://avatars.discourse-cdn.com/v4/letter/g/898d66/32.png) [@ggreen702](https://forum.arcdroidcnc.com/u/ggreen702)\
**Post date:** [January 9, 2024, 9:10pm UTC](https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768/1 "2024-01-09T21:10:24Z")

</div>

![1st & 2nd Cuts Turtle-Shark](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/e/eeea59c488fa328c5e9ec76356bc79a44ebf1499.jpeg)  
Can’t believe what the Arcdroid is capable of achieving. I bought these dxf files from etsy. After figuring out scale, x…y…etc, these are my 2 first cuts. Cant wait to see the other files I bought. To everyone helping me getting up and running I am grateful to you.

More to come,  
Glenn

---

<div class="post-metadata">

**Author:** ![Matt\_UK](https://avatars.discourse-cdn.com/v4/letter/m/65b543/32.png) [@Matt\_UK](https://forum.arcdroidcnc.com/u/Matt_UK)\
**Post date:** [January 9, 2024, 9:56pm UTC](https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768/2 "2024-01-09T21:56:45Z")

</div>

Looking good. The journey is quite enjoyable making mistakes and learning as you go - Onwards and upwards. happy cutting 😀

---

<div class="post-metadata">

**Author:** ![Genek](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@Genek](https://forum.arcdroidcnc.com/u/Genek)\
**Post date:** [January 9, 2024, 10:16pm UTC](https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768/3 "2024-01-09T22:16:14Z")

</div>

Great results . How did the arcfony work? Any major adjustments with it ?

---

<div class="post-metadata">

**Author:** ![ggreen702](https://avatars.discourse-cdn.com/v4/letter/g/898d66/32.png) [@ggreen702](https://forum.arcdroidcnc.com/u/ggreen702)\
**Post date:** [January 9, 2024, 10:17pm UTC](https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768/4 "2024-01-09T22:17:22Z")

</div>

Thank you Matt…  
Couldn’t have said it better myself. Lots to learn… I’ve been in YouTube college the last month so now I’m putting it to the practical application.  
Always open to suggestions.  
Happy Sparking

---

<div class="post-metadata">

**Author:** ![ggreen702](https://avatars.discourse-cdn.com/v4/letter/g/898d66/32.png) [@ggreen702](https://forum.arcdroidcnc.com/u/ggreen702)\
**Post date:** [January 11, 2024, 8:37am UTC](https://forum.arcdroidcnc.com/t/finally-made-my-1st-cuts-today/3768/5 "2024-01-11T08:37:49Z")

</div>

Arcfony exceeded my expectations. For an inexspensive machine this little guy packs a punch. I cut this 16g rolled steel at 60 psi / 23 amps / 44 in minute.  
Really happy with it.