# Foot controller

**URL:** <https://forum.arcdroidcnc.com/t/foot-controller/3357>\
**Category:** General Discussion\
**Created:** [October 11, 2023, 4:05pm UTC](https://forum.arcdroidcnc.com/t/foot-controller/3357 "2023-10-11T16:05:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [October 11, 2023, 4:05pm UTC](https://forum.arcdroidcnc.com/t/foot-controller/3357/1 "2023-10-11T16:05:21Z")

</div>

By chance is there a foot controller in the works to control the button on the pen. My hands shakes and it’s becoming increasingly difficult to hold down the button while tracing.

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [October 12, 2023, 11:44am UTC](https://forum.arcdroidcnc.com/t/foot-controller/3357/2 "2023-10-12T11:44:38Z")

</div>

Hey @Jdd

We do not have a foot control in our line up but Send us an email [info@arcdroidcnc.com](mailto:info@arcdroidcnc.com) and we’ll provide you some wiring instructions to create your own if you’d like

Cheers  
AM

---

<div class="post-metadata">

**Author:** ![Flyboyedwards1](https://avatars.discourse-cdn.com/v4/letter/f/ba8739/32.png) [@Flyboyedwards1](https://forum.arcdroidcnc.com/u/Flyboyedwards1)\
**Post date:** [November 5, 2023, 4:23pm UTC](https://forum.arcdroidcnc.com/t/foot-controller/3357/3 "2023-11-05T16:23:27Z")

</div>

That’s a great add on idea! A great convenience for many!