# Greetings from Calgary
**URL:** https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335
**Category:** Introductions
**Created:** [February 9, 2023, 4:19pm UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335 "2023-02-09T16:19:30Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Behemoth60](https://forum.arcdroidcnc.com/u/Behemoth60)
#### Post date: [February 9, 2023, 4:19pm UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/1 "2023-02-09T16:19:30Z")
Greetings all. I just ordered my ArcDroid. I am sitting here refreshing the UPS tracking website every few seconds.
I have the baby ‘Everlast 25i’ plasma that I am going to test out, because, you know… it’s what I have. I don’t see it on the list of confirmed plasma machines. Is that because it’s just never been tried, or it’s been tried and died?
I’ve been cutting and bending steel by hand for far too long, and I am very excited to introduce this new machine into my fabrication workflow.
---
### Author:  [@BobD](https://forum.arcdroidcnc.com/u/BobD)
#### Post date: [February 9, 2023, 4:30pm UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/2 "2023-02-09T16:30:12Z")
Everlast25i should work ok. It is not a high freq. start unit. Arcdroid really opens up fabbing capabilities!!
---
### Author:  [@bobplewajr](https://forum.arcdroidcnc.com/u/bobplewajr)
#### Post date: [February 10, 2023, 10:39am UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/3 "2023-02-10T10:39:03Z")
@Behemoth60 Welcome! Ahhhhh…I remember the anticipation. I attached a link to the compatible cutters.
> [@The New Compatible Plasma Cutter List](https://forum.arcdroidcnc.com/t/the-new-compatible-plasma-cutter-list/554):
>
> A Low Frequency start Plasma cutter is required for the ArcDroid™ to function properly All cutters below have been tested by us or confirmed by Users. There may be more Please add your experience in the comments below. NOTE: When searching for your own Plasma cutter Pilot Arc does NOT equal low frequency start. Everlast PowerPlasma 52i/62i and 82i 256Si and 164 Si Three in one Hypertherm Powermax 30i (Air), 30XP 45,45XP, 65/65 Sync 85/85 Sync (all in the Powemax & Sync series should…
Hope it arrives soon. You’re gonna have a blast.
Good Luck 👍
---
### Author:  [@Behemoth60](https://forum.arcdroidcnc.com/u/Behemoth60)
#### Post date: [February 22, 2023, 4:03pm UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/5 "2023-02-22T16:03:02Z")
After a bit of a hick-up with UPS, I finally got the machine last evening. What a clever piece of kit. The use of an ‘arm’ in this manner is quite innovative, and has really filled an unmet niche in the market. I called the ‘other’ Canadian CNC machine builder out of Kamloops, and their entry level system for a 4x4 table was going to be $32,000. That’s just out of reason for a home-hobby user. A guy can save his non-existing-Canadian-pennies and afford this machine.
Anyway, tonight I will get it calibrated and see if I can get some cuts started. Very excited.
---
### Author:  [@Pwski](https://forum.arcdroidcnc.com/u/Pwski)
#### Post date: [April 23, 2023, 5:24pm UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/6 "2023-04-23T17:24:13Z")
Hello from California
I have just received my unit. I easily connected it to my Eastwood Versacut 60.
---
### Author:  [@BobD](https://forum.arcdroidcnc.com/u/BobD)
#### Post date: [April 23, 2023, 6:11pm UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/7 "2023-04-23T18:11:41Z")
Your in for some fun and interesting new fab work!
---
### Author:  [@Rich8583](https://forum.arcdroidcnc.com/u/Rich8583)
#### Post date: [November 9, 2023, 5:38am UTC](https://forum.arcdroidcnc.com/t/greetings-from-calgary/1335/8 "2023-11-09T05:38:53Z")
Hi Behemoth. I am curious as to what duties/fees/taxes you incurred bringing this unit into Canada on top of the price?
Thanks.
Rich