# Has anyone used QCAD?

**URL:** <https://forum.arcdroidcnc.com/t/has-anyone-used-qcad/5644>\
**Category:** General Discussion\
**Created:** [November 12, 2025, 5:44pm UTC](https://forum.arcdroidcnc.com/t/has-anyone-used-qcad/5644 "2025-11-12T17:44:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brad](https://avatars.discourse-cdn.com/v4/letter/b/59ef9b/32.png) [@Brad](https://forum.arcdroidcnc.com/u/Brad)\
**Post date:** [November 12, 2025, 5:44pm UTC](https://forum.arcdroidcnc.com/t/has-anyone-used-qcad/5644/1 "2025-11-12T17:44:14Z")

</div>

Good afternoon  
Just wondering if anyone has used QCAD/CAM software with the Arcdriod. Just would like to here how you like it good or bad.I have tried the Fusion 360 trial version, but for some reason they say it is fully open and it isn’t. They also want $120 a month for the full version. Not in my budget.  
Thanks

---

<div class="post-metadata">

**Author:** ![Long9470](https://avatars.discourse-cdn.com/v4/letter/l/b77776/32.png) [@Long9470](https://forum.arcdroidcnc.com/u/Long9470)\
**Post date:** [November 14, 2025, 11:47pm UTC](https://forum.arcdroidcnc.com/t/has-anyone-used-qcad/5644/2 "2025-11-14T23:47:47Z")

</div>

Qcad works great for the pricepoint.

---

<div class="post-metadata">

**Author:** ![DPISup](https://avatars.discourse-cdn.com/v4/letter/d/a3d4f5/32.png) [@DPISup](https://forum.arcdroidcnc.com/u/DPISup)\
**Post date:** [January 13, 2026, 2:50am UTC](https://forum.arcdroidcnc.com/t/has-anyone-used-qcad/5644/3 "2026-01-13T02:50:25Z")

</div>

Complete newbie here. I have been using Qcad to make the DXF then sheetcam (free version) for post processing. Works well. I have tried the Qcad/cam trial, but you are limited on what you can make in the cam trial. I would recommend the paid Qcad ($50) and the free sheetcam. You can purchase the Qcad/cam upgrade later if you want. Email them for the discount code so you don’t pay for the Qcad twice.