# Help with Chattering

**URL:** https://forum.arcdroidcnc.com/t/help-with-chattering/4080
**Category:** General Discussion
**Created:** [April 4, 2024, 3:07pm UTC](https://forum.arcdroidcnc.com/t/help-with-chattering/4080 "2024-04-04T15:07:54Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![FarmerFab](https://avatars.discourse-cdn.com/v4/letter/f/e19adc/32.png) [@FarmerFab](https://forum.arcdroidcnc.com/u/FarmerFab)
#### Post date: [April 4, 2024, 3:07pm UTC](https://forum.arcdroidcnc.com/t/help-with-chattering/4080/1 "2024-04-04T15:07:54Z")

</div>

New to the game and seem to have a problem with my arcdroid arm chattering or vibrating while cutting parts. Ive tried loosening belts and adjusting “jerk” setting down to 2 but doesnt seem to help. Do i need to keep loosening or is there something else i should be looking for?

---

<div class="post-metadata">

### Author: ![Rcutting](https://avatars.discourse-cdn.com/v4/letter/r/3d9bf3/32.png) [@Rcutting](https://forum.arcdroidcnc.com/u/Rcutting)
#### Post date: [April 19, 2024, 2:55pm UTC](https://forum.arcdroidcnc.com/t/help-with-chattering/4080/2 "2024-04-19T14:55:16Z")

</div>

make sure your torch cable isn’t hanging up.  
also watch amp mechanic’s video on settings, sorry i dont have the link