# HF start updates

**URL:** <https://forum.arcdroidcnc.com/t/hf-start-updates/992>\
**Category:** General Discussion\
**Created:** [January 19, 2023, 2:34pm UTC](https://forum.arcdroidcnc.com/t/hf-start-updates/992 "2023-01-19T14:34:53Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tonyhass1](https://avatars.discourse-cdn.com/v4/letter/t/8797f3/32.png) [@tonyhass1](https://forum.arcdroidcnc.com/u/tonyhass1)\
**Post date:** [January 19, 2023, 2:34pm UTC](https://forum.arcdroidcnc.com/t/hf-start-updates/992/1 "2023-01-19T14:34:54Z")

</div>

Are there any new updates on if this will ever work with hf start machines? I own 3 different hf start plasmas, and dont realy want to buy another one, but i do like the versatility and portability of the arcdroid.

---

<div class="post-metadata">

**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\
**Post date:** [January 19, 2023, 3:15pm UTC](https://forum.arcdroidcnc.com/t/hf-start-updates/992/2 "2023-01-19T15:15:48Z")

</div>

It is an electrical interference issue. Really no way around it.

---

<div class="post-metadata">

**Author:** ![tonyhass1](https://avatars.discourse-cdn.com/v4/letter/t/8797f3/32.png) [@tonyhass1](https://forum.arcdroidcnc.com/u/tonyhass1)\
**Post date:** [January 19, 2023, 3:37pm UTC](https://forum.arcdroidcnc.com/t/hf-start-updates/992/3 "2023-01-19T15:37:26Z")

</div>

Ok. Thank you. I appreciate the reply.