# HyperTherm 85 Sync

**URL:** <https://forum.arcdroidcnc.com/t/hypertherm-85-sync/5752>\
**Category:** General Discussion\
**Created:** [January 25, 2026, 12:24am UTC](https://forum.arcdroidcnc.com/t/hypertherm-85-sync/5752 "2026-01-25T00:24:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Micahq](https://avatars.discourse-cdn.com/v4/letter/m/77aa72/32.png) [@Micahq](https://forum.arcdroidcnc.com/u/Micahq)\
**Post date:** [January 25, 2026, 12:24am UTC](https://forum.arcdroidcnc.com/t/hypertherm-85-sync/5752/1 "2026-01-25T00:24:47Z")

</div>

I have read every HyperTherm message on here and nothing directly says that if you have the HyerTherm 85 Sync PCP port + the Machine Torch and you buy the Connection cable for HyperTherm PCP port to ArcDroid it should work, without having to hack into the Torch.  
Can I assume this to be correct?

Here is my setup. Used a Harbor Freight cart and made removable cutting area so I can store easily.

 ![IMG_5215](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/6/6fdc9632a1f636ceee0ebe899bdea914d429bffe.jpeg)

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [January 29, 2026, 3:33pm UTC](https://forum.arcdroidcnc.com/t/hypertherm-85-sync/5752/2 "2026-01-29T15:33:26Z")

</div>

Yep If you have the machine torch the CPC port will work no problems.

No hacking required. Its when you try to use the hand torch with the CPC port that Hypertherm disables it.