# Is anyone using Eastwood 60 plasma

**URL:** <https://forum.arcdroidcnc.com/t/is-anyone-using-eastwood-60-plasma/6138>\
**Category:** General Discussion\
**Created:** [September 27, 2026, 3:42pm UTC](https://forum.arcdroidcnc.com/t/is-anyone-using-eastwood-60-plasma/6138 "2026-09-27T15:42:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tburg](https://avatars.discourse-cdn.com/v4/letter/t/b487fb/32.png) [@Tburg](https://forum.arcdroidcnc.com/u/Tburg)\
**Post date:** [September 27, 2026, 3:42pm UTC](https://forum.arcdroidcnc.com/t/is-anyone-using-eastwood-60-plasma/6138/1 "2026-09-27T15:42:08Z")

</div>

Machine hook up for my Eastwood 60 would like to get a torch trigger cable have made a homemade one

---

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [October 2, 2026, 11:38pm UTC](https://forum.arcdroidcnc.com/t/is-anyone-using-eastwood-60-plasma/6138/2 "2026-10-02T23:38:33Z")

</div>

> [@Tburg](#):
>
> Eastwood 60

\*\*Due to its high-frequency start feature, we do not recommend using this machine on a CNC plasma table.\*\* from Eastwood website use at your own risk.