# Machine Error, Reset Detected!?

**URL:** <https://forum.arcdroidcnc.com/t/machine-error-reset-detected/4546>\
**Category:** General Discussion\
**Created:** [October 4, 2024, 6:00pm UTC](https://forum.arcdroidcnc.com/t/machine-error-reset-detected/4546 "2024-10-04T18:00:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dencope](https://avatars.discourse-cdn.com/v4/letter/d/82dd89/32.png) [@Dencope](https://forum.arcdroidcnc.com/u/Dencope)\
**Post date:** [October 4, 2024, 6:00pm UTC](https://forum.arcdroidcnc.com/t/machine-error-reset-detected/4546/1 "2024-10-04T18:00:20Z")

</div>

Anyone else have this problem? Right after cut starts, it stops, in top left says “machine error” and in middle of screen says “reset detected”. It wouldn’t let me upload video so I’ll attach a link to my google drive with the video. Any help would be much appreciated.

> **[New video by Dencope](https://photos.app.goo.gl/fijYb5RCrvm5HKaGA)**

---

<div class="post-metadata">

**Author:** ![tgoacher](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/tgoacher/32/576_2.png) [@tgoacher](https://forum.arcdroidcnc.com/u/tgoacher)\
**Post date:** [October 6, 2024, 7:21am UTC](https://forum.arcdroidcnc.com/t/machine-error-reset-detected/4546/2 "2024-10-06T07:21:53Z")

</div>

What plasma unit are you using?

---

<div class="post-metadata">

**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\
**Post date:** [October 6, 2024, 1:28pm UTC](https://forum.arcdroidcnc.com/t/machine-error-reset-detected/4546/3 "2024-10-06T13:28:52Z")

</div>

This does sound like an issue of electrical interference with the plasma cutter being the source.

---

<div class="post-metadata">

**Author:** ![Dencope](https://avatars.discourse-cdn.com/v4/letter/d/82dd89/32.png) [@Dencope](https://forum.arcdroidcnc.com/u/Dencope)\
**Post date:** [October 8, 2024, 2:08am UTC](https://forum.arcdroidcnc.com/t/machine-error-reset-detected/4546/4 "2024-10-08T02:08:10Z")

</div>

hypertherm xp 45

I had the ethernet cable resting on the wires from my cnc port for voltage and on/off. Anyways just the cables touching was enough to cause the issue. Can’t believe I didn’t notice. All good now. Thanks