# More Tips and tricks Videos

**URL:** <https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313>\
**Category:** General Discussion\
**Created:** [April 13, 2023, 12:43am UTC](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313 "2023-04-13T00:43:06Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![mtw1](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/mtw1/32/216_2.png) [@mtw1](https://forum.arcdroidcnc.com/u/mtw1)\
**Post date:** [May 4, 2023, 1:28pm UTC](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313/21 "2023-05-04T13:28:52Z")

</div>

2" cut height or 2 mm…you are using both units in the same sentence.  
Hopefully that MM, I think the speed ( too fast) is the issue, possibly ground location?

Also fresh tip/electrode helps a bunch

---

<div class="post-metadata">

**Author:** ![Shocky](https://avatars.discourse-cdn.com/v4/letter/s/f0a364/32.png) [@Shocky](https://forum.arcdroidcnc.com/u/Shocky)\
**Post date:** [March 14, 2024, 10:14am UTC](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313/22 "2024-03-14T10:14:56Z")

</div>

Playing around in sheetcam you can set cut rules to vary the speed for different parts of the cut which would help in a file like this, but they don’t transfer to the droid it seems after a few tests. It picks up on the first speed and stays there.  
Be interested to know if that’s something that could be integrated into future updates.

---

<div class="post-metadata">

**Author:** ![arcnc](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@arcnc](https://forum.arcdroidcnc.com/u/arcnc)\
**Post date:** [March 14, 2024, 11:06pm UTC](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313/23 "2024-03-14T23:06:00Z")

</div>

I posted a query about editing saved simple trace files. That topic would be helpful

---

<div class="post-metadata">

**Author:** ![arcnc](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@arcnc](https://forum.arcdroidcnc.com/u/arcnc)\
**Post date:** [March 15, 2024, 12:36pm UTC](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313/24 "2024-03-15T12:36:15Z")

</div>

A bit more detail per topic might be helpful, Often can;t see what;s being pressed on the UI

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [March 15, 2024, 1:23pm UTC](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313/25 "2024-03-15T13:23:12Z")

</div>

@arcnc Yep that’s on the next filming list!

[Previous page](https://forum.arcdroidcnc.com/t/more-tips-and-tricks-videos/2313.md?page=1)