# My Cutting Table **URL:** \ **Category:** General Discussion\ **Created:** [February 12, 2023, 9:30pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386 "2023-02-12T21:30:38Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [February 12, 2023, 9:30pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/1 "2023-02-12T21:30:38Z")
Finally got a table built and the Arcdroid mounted. Still wating on the automation board and machine torch for my new 60i before i cut anything. ![20230212_152633](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/99cbcf2dc3aadeba64295c6e38c8c8bc63e3a455.jpeg) ![20230212_152642](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/99ede5bfa0ece3d1c2464dad89a308635691388a.jpeg) ---
**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\ **Post date:** [February 13, 2023, 3:09pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/2 "2023-02-13T15:09:53Z")
Very Nice! πŸ‘ πŸ˜† πŸ‘ ---
**Author:** ![RJS](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@RJS](https://forum.arcdroidcnc.com/u/RJS)\ **Post date:** [February 19, 2023, 7:58am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/3 "2023-02-19T07:58:07Z")
Good work, would like to build something like this. Any more pictures? ---
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [February 19, 2023, 3:19pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/4 "2023-02-19T15:19:22Z")
Dont mind the cable support, have to finish that yet. ![20230219_091622](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/0cde63528d06751d725da6bbe0ea9875917aafb4.jpeg) ![20230219_091640](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/682b7175fdc9a213914a97ed04643c4ce9f3972e.jpeg) ![20230219_091657](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/92a59f79b36c75fc8295693adfee9e56cd550f86.jpeg) ![20230219_091707](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/9385f3792c20882490a1396b34cb55a350737c34.jpeg) ---
**Author:** ![AK\_Marty](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/ak_marty/32/176_2.png) [@AK\_Marty](https://forum.arcdroidcnc.com/u/AK_Marty)\ **Post date:** [February 19, 2023, 8:43pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/5 "2023-02-19T20:43:29Z")
I have a Cutmaster 60i and don’t know what this automation board is. Can you fill me in?? ---
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [February 19, 2023, 11:00pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/6 "2023-02-19T23:00:11Z")
Goes inside the unit then you have a plug on the back to plug in for torch control and height control. Just eniminates the need to wire to the torch itself. ---
**Author:** ![AK\_Marty](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/ak_marty/32/176_2.png) [@AK\_Marty](https://forum.arcdroidcnc.com/u/AK_Marty)\ **Post date:** [February 21, 2023, 12:05am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/7 "2023-02-21T00:05:11Z")
Do you have a link to where I can buy this board? ---
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [February 21, 2023, 12:19am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/8 "2023-02-21T00:19:04Z")
Here is the part number 9-8308 And the cable to go from plas to Arcdroid 9-1125 ---
**Author:** ![AK\_Marty](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/ak_marty/32/176_2.png) [@AK\_Marty](https://forum.arcdroidcnc.com/u/AK_Marty)\ **Post date:** [March 7, 2023, 6:12pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/9 "2023-03-07T18:12:22Z")
Thank you Brent! And now I have to type more than 20 characters to post. ---
**Author:** ![ACFerguson](https://avatars.discourse-cdn.com/v4/letter/a/35a633/32.png) [@ACFerguson](https://forum.arcdroidcnc.com/u/ACFerguson)\ **Post date:** [March 7, 2023, 7:34pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/10 "2023-03-07T19:34:45Z")
> [@Brent](#): > > n Is that a little water bucket on the bottom or your table? ---
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [March 7, 2023, 8:11pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/11 "2023-03-07T20:11:49Z")
No water, but it catches all, or most anyway, of the junk that is made when you are cutting. ---
**Author:** ![Lotlwc](https://avatars.discourse-cdn.com/v4/letter/l/bc8723/32.png) [@Lotlwc](https://forum.arcdroidcnc.com/u/Lotlwc)\ **Post date:** [April 7, 2023, 10:50pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/12 "2023-04-07T22:50:14Z")
Wow nice job I have to make one yet not sure about going with extraction system or a water trap. ---
**Author:** ![Lotlwc](https://avatars.discourse-cdn.com/v4/letter/l/bc8723/32.png) [@Lotlwc](https://forum.arcdroidcnc.com/u/Lotlwc)\ **Post date:** [April 9, 2023, 7:20am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/13 "2023-04-09T07:20:43Z")
Would it be possible to get the dimensions of the table top from you please. Is the slat area same as cut area of the droid or larger ---
**Author:** ![mtw1](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/mtw1/32/216_2.png) [@mtw1](https://forum.arcdroidcnc.com/u/mtw1)\ **Post date:** [April 10, 2023, 3:04am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/14 "2023-04-10T03:04:51Z")
Super nice setup you built there β€Όβ€Ό ---
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [April 11, 2023, 11:10pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/15 "2023-04-11T23:10:00Z")
The entire thing is 48x32 and cutting area is 48x20 ---
**Author:** ![Lotlwc](https://avatars.discourse-cdn.com/v4/letter/l/bc8723/32.png) [@Lotlwc](https://forum.arcdroidcnc.com/u/Lotlwc)\ **Post date:** [April 12, 2023, 12:01am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/16 "2023-04-12T00:01:11Z")
Hey thanks Brent so the arcdroid base plate is included in the 32 inches thanks again ---
**Author:** ![Brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@Brent](https://forum.arcdroidcnc.com/u/Brent)\ **Post date:** [April 12, 2023, 12:52am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/17 "2023-04-12T00:52:50Z")
That is correct, 32 include the mounting surface. ---
**Author:** ![Lotlwc](https://avatars.discourse-cdn.com/v4/letter/l/bc8723/32.png) [@Lotlwc](https://forum.arcdroidcnc.com/u/Lotlwc)\ **Post date:** [April 12, 2023, 11:06am UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/18 "2023-04-12T11:06:59Z")
I have to finish a log splitter I am fabricating before I can start it, I have the droid as well as a razor cut45 my existing plasma table is an old stainless steel tub but it works,lol will share progress when i get my A into G cheers ---
**Author:** ![clarkoh](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@clarkoh](https://forum.arcdroidcnc.com/u/clarkoh)\ **Post date:** [October 26, 2024, 7:19pm UTC](https://forum.arcdroidcnc.com/t/my-cutting-table/1386/20 "2024-10-26T19:19:16Z")
Nice work! I am inspired to build one