# My table setup, water bath, tablet holder etc

**URL:** <https://forum.arcdroidcnc.com/t/my-table-setup-water-bath-tablet-holder-etc/2176>\
**Category:** Gallery\
**Created:** [April 2, 2023, 12:26am UTC](https://forum.arcdroidcnc.com/t/my-table-setup-water-bath-tablet-holder-etc/2176 "2023-04-02T00:26:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mtw1](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/mtw1/32/216_2.png) [@mtw1](https://forum.arcdroidcnc.com/u/mtw1)\
**Post date:** [April 2, 2023, 12:26am UTC](https://forum.arcdroidcnc.com/t/my-table-setup-water-bath-tablet-holder-etc/2176/1 "2023-04-02T00:26:00Z")

</div>

Here’s what I’m using for my Arcdroid  
I made a table for hand torch and plasma cutting a few years back, I’ve dedicated it to the AD now, used a bunch of misc odds and ends and made a tablet holder, pivot on heim joints, adjustable vertically and tilt for glare. Cut down a 55g drum and use it as a water bath, only need an inch of water, also running a miller smoke eater, works great, no fumes in the shop.  
Miller Spectrum 625 provides the heat

A section of pex tubing supports the cable to the machine torch, keeping it clear of the Z cable

 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/f8ce39869027effea9b5a786432481697558b50c.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/475c4fe1887f65fdf6f84eb5d90e49d4e36fa76e.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/e8ae3980155d10b6760a8b016d25d5af19b02518.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/43e564ac06208c65e9c4beb8de3f5ffce057f3ac.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/f685df1f6425db9b7da370d33bef80d67d54e768.jpeg)