# Need Help setting up powermax65 sync

**URL:** <https://forum.arcdroidcnc.com/t/need-help-setting-up-powermax65-sync/5114>\
**Category:** General Discussion\
**Created:** [March 15, 2025, 11:20pm UTC](https://forum.arcdroidcnc.com/t/need-help-setting-up-powermax65-sync/5114 "2025-03-15T23:20:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zwf](https://avatars.discourse-cdn.com/v4/letter/z/f475e1/32.png) [@Zwf](https://forum.arcdroidcnc.com/u/Zwf)\
**Post date:** [March 15, 2025, 11:20pm UTC](https://forum.arcdroidcnc.com/t/need-help-setting-up-powermax65-sync/5114/1 "2025-03-15T23:20:42Z")

</div>

Need help setting up the powermax 65sync to the arc droid Like what wires go where from the cnc port and how to get hand torch to work. Then thc  
Any help is awesome

---

<div class="post-metadata">

**Author:** ![Jay](https://avatars.discourse-cdn.com/v4/letter/j/ed8c4c/32.png) [@Jay](https://forum.arcdroidcnc.com/u/Jay)\
**Post date:** [March 19, 2025, 7:40pm UTC](https://forum.arcdroidcnc.com/t/need-help-setting-up-powermax65-sync/5114/2 "2025-03-19T19:40:32Z")

</div>

Im running the same setup, unless your running a machine torch the cnc port is useless. Have to tap into the hand touch wherever it goes in the machine

---

<div class="post-metadata">

**Author:** ![Zwf](https://avatars.discourse-cdn.com/v4/letter/z/f475e1/32.png) [@Zwf](https://forum.arcdroidcnc.com/u/Zwf)\
**Post date:** [March 19, 2025, 10:03pm UTC](https://forum.arcdroidcnc.com/t/need-help-setting-up-powermax65-sync/5114/3 "2025-03-19T22:03:06Z")

</div>

How did u do it any pics and tips would be awesome

---

<div class="post-metadata">

**Author:** ![Zwf](https://avatars.discourse-cdn.com/v4/letter/z/f475e1/32.png) [@Zwf](https://forum.arcdroidcnc.com/u/Zwf)\
**Post date:** [March 27, 2025, 2:00am UTC](https://forum.arcdroidcnc.com/t/need-help-setting-up-powermax65-sync/5114/4 "2025-03-27T02:00:02Z")

</div>

What cpc port wires porta are what. 4 wires.