# New parts for Droid

**URL:** <https://forum.arcdroidcnc.com/t/new-parts-for-droid/680>\
**Category:** General Discussion\
**Created:** [January 1, 2023, 6:00pm UTC](https://forum.arcdroidcnc.com/t/new-parts-for-droid/680 "2023-01-01T18:00:22Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jsjlegoman](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/jsjlegoman/32/127_2.png) [@jsjlegoman](https://forum.arcdroidcnc.com/u/jsjlegoman)\
**Post date:** [January 1, 2023, 6:00pm UTC](https://forum.arcdroidcnc.com/t/new-parts-for-droid/680/1 "2023-01-01T18:00:22Z")

</div>

I was on of the unfortunate ones and received a bad part on the z axis for the droid and was able to get it fix and replace. Thank you @Andrew for the new part and it is working a 100% better.

 ![20221231_185020](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/6e6a8588cbe7e5648b0632065cde1450a7603688.jpeg)  
[  
  ![20221231_185029](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/7205662bd9ec387a73b344de4d1c7c456a7f667a.jpeg)  
 ](https://forum.arcdroidcnc.com/t/plasma-tourch-not-able-to-return-to-height/517/9)

---

<div class="post-metadata">

**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\
**Post date:** [January 1, 2023, 10:16pm UTC](https://forum.arcdroidcnc.com/t/new-parts-for-droid/680/2 "2023-01-01T22:16:49Z")

</div>

Very good. Which bearing nut  
plate is the new one?

---

<div class="post-metadata">

**Author:** ![jsjlegoman](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/jsjlegoman/32/127_2.png) [@jsjlegoman](https://forum.arcdroidcnc.com/u/jsjlegoman)\
**Post date:** [January 2, 2023, 7:50am UTC](https://forum.arcdroidcnc.com/t/new-parts-for-droid/680/3 "2023-01-02T07:50:29Z")

</div>

The smaller of the 2 is the new one that went in

---

<div class="post-metadata">

**Author:** ![Denali10](https://avatars.discourse-cdn.com/v4/letter/d/e36b37/32.png) [@Denali10](https://forum.arcdroidcnc.com/u/Denali10)\
**Post date:** [January 3, 2023, 8:07pm UTC](https://forum.arcdroidcnc.com/t/new-parts-for-droid/680/4 "2023-01-03T20:07:07Z")

</div>

what was the symptoms as mine is very jerky in the calibration proses it took numerous  
attempts to get it.

---

<div class="post-metadata">

**Author:** ![jsjlegoman](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/jsjlegoman/32/127_2.png) [@jsjlegoman](https://forum.arcdroidcnc.com/u/jsjlegoman)\
**Post date:** [January 4, 2023, 1:09am UTC](https://forum.arcdroidcnc.com/t/new-parts-for-droid/680/5 "2023-01-04T01:09:44Z")

</div>

@Denali10 my problem was at the top of the z axis and it also felt like it didnt have enough power to lift the torch up.