# New to Arcdroid

**URL:** <https://forum.arcdroidcnc.com/t/new-to-arcdroid/5939>\
**Category:** General Discussion\
**Created:** [May 22, 2026, 7:23pm UTC](https://forum.arcdroidcnc.com/t/new-to-arcdroid/5939 "2026-05-22T19:23:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Doepopper](https://avatars.discourse-cdn.com/v4/letter/d/7ba0ec/32.png) [@Doepopper](https://forum.arcdroidcnc.com/u/Doepopper)\
**Post date:** [May 22, 2026, 7:23pm UTC](https://forum.arcdroidcnc.com/t/new-to-arcdroid/5939/1 "2026-05-22T19:23:57Z")

</div>

Hello, I’m new to Arcdroid but have been running CNC plasma table for many years. My question is , do any of you use Vectric and Shheet cam with your Arcdroid?

---

<div class="post-metadata">

**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\
**Post date:** [May 22, 2026, 7:52pm UTC](https://forum.arcdroidcnc.com/t/new-to-arcdroid/5939/2 "2026-05-22T19:52:43Z")

</div>

Arcdroid has a Sheetcam post processor to download so Sheetcam must be ok to use.

I’m a Simple Trace guy…

---

<div class="post-metadata">

**Author:** ![jseifers71](https://avatars.discourse-cdn.com/v4/letter/j/f1d935/32.png) [@jseifers71](https://forum.arcdroidcnc.com/u/jseifers71)\
**Post date:** [May 27, 2026, 6:38pm UTC](https://forum.arcdroidcnc.com/t/new-to-arcdroid/5939/3 "2026-05-27T18:38:48Z")

</div>

Primarily Sheetcam as BobD noted (has post processor). Numerous videos on how to use. I’ve primarily used OnShape for dimensional/complex parts for design and InkScape for ornamental signs.

---

<div class="post-metadata">

**Author:** ![madajax](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/madajax/32/2009_2.png) [@madajax](https://forum.arcdroidcnc.com/u/madajax)\
**Post date:** [May 28, 2026, 10:34pm UTC](https://forum.arcdroidcnc.com/t/new-to-arcdroid/5939/4 "2026-05-28T22:34:36Z")

</div>

I like to design with Fusion360 and export the drawing to Sheetcam.