# Pattern Problem

**URL:** <https://forum.arcdroidcnc.com/t/pattern-problem/5069>\
**Category:** General Discussion\
**Created:** [March 4, 2025, 5:24pm UTC](https://forum.arcdroidcnc.com/t/pattern-problem/5069 "2025-03-04T17:24:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![plongson](https://avatars.discourse-cdn.com/v4/letter/p/96bed5/32.png) [@plongson](https://forum.arcdroidcnc.com/u/plongson)\
**Post date:** [March 4, 2025, 5:24pm UTC](https://forum.arcdroidcnc.com/t/pattern-problem/5069/1 "2025-03-04T17:24:11Z")

</div>

Simple part built on Fusion 360…AD will cut ONE part fine, but when I pattern the part (4ea) AD only wants to just cut the lead-in on each part, nothing else…any ideas??

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [March 5, 2025, 3:12pm UTC](https://forum.arcdroidcnc.com/t/pattern-problem/5069/2 "2025-03-05T15:12:42Z")

</div>

@plongson

Hmmm that is weird.

Can you send me the file you are having trouble with (patterned and unpatterned)  
[Andrew@arcdroidcnc.com](mailto:Andrew@arcdroidcnc.com)