# Post Processor For Vectric Aspire

**URL:** <https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820>\
**Category:** General Discussion\
**Created:** [May 25, 2023, 12:19am UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820 "2023-05-25T00:19:19Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![JamesGodfrey](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@JamesGodfrey](https://forum.arcdroidcnc.com/u/JamesGodfrey)\
**Post date:** [May 25, 2023, 12:19am UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/1 "2023-05-25T00:19:19Z")

</div>

I have a cnc router and Use Aspire to program it daily. I was wondering if there is a post Processor for Aspire For the Arcdroid or maybe one in the future?

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [May 25, 2023, 8:07pm UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/2 "2023-05-25T20:07:44Z")

</div>

@JamesGodfrey

That has been mentioned before (same for Vcarve) and it is on the “List O stuff” however we have no gotten to it yet

I’ll see if I can’t bump it up the list a smidge

Cheers  
AM

---

<div class="post-metadata">

**Author:** ![JamesGodfrey](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@JamesGodfrey](https://forum.arcdroidcnc.com/u/JamesGodfrey)\
**Post date:** [May 25, 2023, 8:15pm UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/3 "2023-05-25T20:15:17Z")

</div>

Thank you very much. So far I’m loving the machine.

---

<div class="post-metadata">

**Author:** ![Adrianb](https://avatars.discourse-cdn.com/v4/letter/a/bc8723/32.png) [@Adrianb](https://forum.arcdroidcnc.com/u/Adrianb)\
**Post date:** [January 3, 2024, 2:42pm UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/4 "2024-01-03T14:42:10Z")

</div>

Good post!  
I’m in the same boat. I have the full Aspire program too, and will be keeping an eye out on this post.  
Thanks

---

<div class="post-metadata">

**Author:** ![Matt\_UK](https://avatars.discourse-cdn.com/v4/letter/m/65b543/32.png) [@Matt\_UK](https://forum.arcdroidcnc.com/u/Matt_UK)\
**Post date:** [January 3, 2024, 3:56pm UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/5 "2024-01-03T15:56:10Z")

</div>

The Post Proc. for VCARVE works in Aspire but the Vetric’s CAM side of things is not really optimized for plasma. I have had success with the Gcode from Aspire but find SheetCam much easier and it works better IMHO

---

<div class="post-metadata">

**Author:** ![Dave](https://avatars.discourse-cdn.com/v4/letter/d/ee7513/32.png) [@Dave](https://forum.arcdroidcnc.com/u/Dave)\
**Post date:** [March 21, 2024, 12:03am UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/6 "2024-03-21T00:03:24Z")

</div>

I too am looking for aPP for Aspire. I attempted the “torchmate PP” with no joy.

---

<div class="post-metadata">

**Author:** ![JamesGodfrey](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@JamesGodfrey](https://forum.arcdroidcnc.com/u/JamesGodfrey)\
**Post date:** [December 21, 2025, 5:43pm UTC](https://forum.arcdroidcnc.com/t/post-processor-for-vectric-aspire/2820/7 "2025-12-21T17:43:00Z")

</div>

I see you have a postprocessor for Aspire and Vcarve. Its in mm and i draw in Inches. I tryed to change it but i must be doing something wrong. Can you create one in Inches? Or tell me what to do to properly change it for inches