# Powered up but no screen **URL:** https://forum.arcdroidcnc.com/t/powered-up-but-no-screen/4651 **Category:** General Discussion **Created:** [November 13, 2024, 11:46pm UTC](https://forum.arcdroidcnc.com/t/powered-up-but-no-screen/4651 "2024-11-13T23:46:12Z") **Posts on this page:** 3 **Page:** 1
### Author: ![Diggers](https://avatars.discourse-cdn.com/v4/letter/d/d2c977/32.png) [@Diggers](https://forum.arcdroidcnc.com/u/Diggers) #### Post date: [November 13, 2024, 11:46pm UTC](https://forum.arcdroidcnc.com/t/powered-up-but-no-screen/4651/1 "2024-11-13T23:46:12Z")
![20241114_102710](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/d/dccb6e5ab671002f0bfb7587353c9af73eaac8d8.jpeg) Hi All. Arcdroid was stored 2 months, wrapped, dry, powered off, unplugged and undisturbed. Went to power up and get power but no indicator light in the screen dial and screen is red. Have tried reset and update but no response to anything. Any suggestions most welcome! Thanks, Diggers. ---
### Author: ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew) #### Post date: [November 18, 2024, 2:35pm UTC](https://forum.arcdroidcnc.com/t/powered-up-but-no-screen/4651/2 "2024-11-18T14:35:20Z")
That’s a corrupted update file. 1st boot without the USB or SD installed and see if that changes 2nd do a fresh format of your USB and copy over the latest Simple Trace update from our website. Do a fresh update and it should be fine Cheers AM ---
### Author: ![Diggers](https://avatars.discourse-cdn.com/v4/letter/d/d2c977/32.png) [@Diggers](https://forum.arcdroidcnc.com/u/Diggers) #### Post date: [November 19, 2024, 11:01pm UTC](https://forum.arcdroidcnc.com/t/powered-up-but-no-screen/4651/3 "2024-11-19T23:01:03Z")
Thanks Andrew. That fixed it. Was a bit worried but thanks for your help. Loving this little machine!