# Problems with Accuracy of Cuts **URL:** \ **Category:** General Discussion\ **Created:** [April 13, 2023, 1:17pm UTC](https://forum.arcdroidcnc.com/t/problems-with-accuracy-of-cuts/2320 "2023-04-13T13:17:39Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![LPinator](https://avatars.discourse-cdn.com/v4/letter/l/ccd318/32.png) [@LPinator](https://forum.arcdroidcnc.com/u/LPinator)\ **Post date:** [April 13, 2023, 1:17pm UTC](https://forum.arcdroidcnc.com/t/problems-with-accuracy-of-cuts/2320/1 "2023-04-13T13:17:39Z")
Hello Community, I have a Question about a Problem that i dont know how to solve by my self. Im having very high tolerances when im cutting a very simple unfold of a sheet-metal-cone (see Pictures). I freshly calibrated the machine 5 times in a row and nothing changed. I have compared my part with the DXF drawing i used and a lasered Part from a Company i sent the drawings to (dont get distracted by the 3 inner holes of the lasered part, i drilled it because i needed one on the other side). You can clearly see the difference in the inner and the outer radii, but the holes on the inside are perfect and i dont know the mistake im making. Im using Fusion360 with the matching postprocessor if that is important to know ![20230413_150045](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/94c3fe7e444ff16a06f7057449a9b65d69b68372.jpeg) ![20230413_150253](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/8b19eb527ab9c6fac926cc5c3608c2c8471e7117.jpeg) ![20230413_150259](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/d22e10adae1b4062bbd5acb7ab9775ce4a5e335d.jpeg) ![20230413_150306](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/548d8b73a1342392730fcd14680ed573b590d01c.jpeg) ![20230413_150311](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/26988551f16c6c76dc52fa9227733f5816df36fe.jpeg) ---
**Author:** ![LPinator](https://avatars.discourse-cdn.com/v4/letter/l/ccd318/32.png) [@LPinator](https://forum.arcdroidcnc.com/u/LPinator)\ **Post date:** [April 13, 2023, 1:27pm UTC](https://forum.arcdroidcnc.com/t/problems-with-accuracy-of-cuts/2320/2 "2023-04-13T13:27:52Z")
In the first picture you can see the difference between the Plasmapart and the DXF Data (red lines = Plasma). in the second picture you can see the firmware version thats currently installed. In the last two pictures is my setup im currently running. ![20230413_152231](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/7497726e60980f7e57be9cf576a2b14f4fe0d87f.jpeg) ![20230413_151902](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/00f569621c8c87894449155e64bf24537d63fd70.jpeg) ![20230413_152126](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/60fd7a42f2adc06f3537c0132bb284ef8ca6c288.jpeg) ![20230413_152138](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/64ebacd4c55c5da799e3ded288d23ac78b98809e.jpeg) ---
**Author:** ![jsjlegoman](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/jsjlegoman/32/127_2.png) [@jsjlegoman](https://forum.arcdroidcnc.com/u/jsjlegoman)\ **Post date:** [April 18, 2023, 6:19am UTC](https://forum.arcdroidcnc.com/t/problems-with-accuracy-of-cuts/2320/3 "2023-04-18T06:19:53Z")
it might be a the difference in kerfs. I know that the kerf on a laser is any where from .003-.010 thousandths and a plasma is any where form .095-.130 thousandths on the cuts ---
**Author:** ![LPinator](https://avatars.discourse-cdn.com/v4/letter/l/ccd318/32.png) [@LPinator](https://forum.arcdroidcnc.com/u/LPinator)\ **Post date:** [May 3, 2023, 7:41pm UTC](https://forum.arcdroidcnc.com/t/problems-with-accuracy-of-cuts/2320/4 "2023-05-03T19:41:14Z")
Hi, in found Out that the DXF was faulty, so everything Worms fine.