# Rotating drawing **URL:** \ **Category:** General Discussion\ **Created:** [April 6, 2024, 5:09pm UTC](https://forum.arcdroidcnc.com/t/rotating-drawing/4088 "2024-04-06T17:09:54Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Joelsams](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@Joelsams](https://forum.arcdroidcnc.com/u/Joelsams)\ **Post date:** [April 6, 2024, 5:09pm UTC](https://forum.arcdroidcnc.com/t/rotating-drawing/4088/1 "2024-04-06T17:09:54Z")
Ok another question, i know i can change the orientation of a drawing on the screen but can and how do i just rotate the object say 90 degrees because the drawing is to big one direction ---
**Author:** ![Cmsmoke](https://avatars.discourse-cdn.com/v4/letter/c/d78d45/32.png) [@Cmsmoke](https://forum.arcdroidcnc.com/u/Cmsmoke)\ **Post date:** [April 6, 2024, 5:18pm UTC](https://forum.arcdroidcnc.com/t/rotating-drawing/4088/2 "2024-04-06T17:18:00Z")
Trace function. Hit edit button. Look for “A” which is angle. Enter a value as in degrees you want it to move. It will rotate it from there. ---
**Author:** ![Joelsams](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@Joelsams](https://forum.arcdroidcnc.com/u/Joelsams)\ **Post date:** [April 6, 2024, 6:11pm UTC](https://forum.arcdroidcnc.com/t/rotating-drawing/4088/3 "2024-04-06T18:11:31Z")
Thanks for the tip, gotta be smarter than the average pickinick basket ---
**Author:** ![HungarianHammer](https://avatars.discourse-cdn.com/v4/letter/h/9f8e36/32.png) [@HungarianHammer](https://forum.arcdroidcnc.com/u/HungarianHammer)\ **Post date:** [April 8, 2024, 12:54am UTC](https://forum.arcdroidcnc.com/t/rotating-drawing/4088/4 "2024-04-08T00:54:45Z")
Edit with simple trace and the parameter fieled labeled A changes angle orientation and is where you change in degrees. Ive always done 45 degree increments.