# Sharing DXF files

**URL:** <https://forum.arcdroidcnc.com/t/sharing-dxf-files/1020>\
**Category:** Gallery\
**Created:** [January 21, 2023, 9:40pm UTC](https://forum.arcdroidcnc.com/t/sharing-dxf-files/1020 "2023-01-21T21:40:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![idelcespedesk](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/idelcespedesk/32/228_2.png) [@idelcespedesk](https://forum.arcdroidcnc.com/u/idelcespedesk)\
**Post date:** [January 21, 2023, 9:40pm UTC](https://forum.arcdroidcnc.com/t/sharing-dxf-files/1020/1 "2023-01-21T21:40:57Z")

</div>

Do we have any space where we can share DXF files, with photos of the cut pieces and the cutting parameters?

---

<div class="post-metadata">

**Author:** ![WacoKid](https://avatars.discourse-cdn.com/v4/letter/w/9dc877/32.png) [@WacoKid](https://forum.arcdroidcnc.com/u/WacoKid)\
**Post date:** [January 23, 2023, 1:37pm UTC](https://forum.arcdroidcnc.com/t/sharing-dxf-files/1020/2 "2023-01-23T13:37:58Z")

</div>

I think there is a facebook group you could share them on. Just upload them in the files section and then you can also make a comment and add a photo of the drawing after it has been cut or a screenshot of it in the cad software if you wanted to.

---

<div class="post-metadata">

**Author:** ![FDC](https://avatars.discourse-cdn.com/v4/letter/f/da6949/32.png) [@FDC](https://forum.arcdroidcnc.com/u/FDC)\
**Post date:** [February 23, 2023, 1:51am UTC](https://forum.arcdroidcnc.com/t/sharing-dxf-files/1020/3 "2023-02-23T01:51:50Z")

</div>

You could always throw things up on thingiverse

---

<div class="post-metadata">

**Author:** ![BobD](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@BobD](https://forum.arcdroidcnc.com/u/BobD)\
**Post date:** [February 23, 2023, 7:09pm UTC](https://forum.arcdroidcnc.com/t/sharing-dxf-files/1020/4 "2023-02-23T19:09:51Z")

</div>

This forum has a section where files can be shared.