# Stencil A-Z, 0-9?

**URL:** <https://forum.arcdroidcnc.com/t/stencil-a-z-0-9/4013>\
**Category:** General Discussion\
**Created:** [March 12, 2024, 3:07pm UTC](https://forum.arcdroidcnc.com/t/stencil-a-z-0-9/4013 "2024-03-12T15:07:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DownStateAg](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@DownStateAg](https://forum.arcdroidcnc.com/u/DownStateAg)\
**Post date:** [March 12, 2024, 3:07pm UTC](https://forum.arcdroidcnc.com/t/stencil-a-z-0-9/4013/1 "2024-03-12T15:07:25Z")

</div>

How cool would it be if simple trace had a stencil mode? A a- Z z, 0-9  
It would be awesome  
I’d pay for that update

---

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [March 12, 2024, 3:41pm UTC](https://forum.arcdroidcnc.com/t/stencil-a-z-0-9/4013/2 "2024-03-12T15:41:54Z")

</div>

[Stencilfy](https://stencilfy.onrender.com/)

[CloudConvert](https://cloudconvert.com/)

---

<div class="post-metadata">

**Author:** ![DownStateAg](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@DownStateAg](https://forum.arcdroidcnc.com/u/DownStateAg)\
**Post date:** [March 14, 2024, 11:57am UTC](https://forum.arcdroidcnc.com/t/stencil-a-z-0-9/4013/3 "2024-03-14T11:57:45Z")

</div>

Thanks, just don’t have a computet/internet in my shop, gotta run down the rd

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [March 15, 2024, 1:28pm UTC](https://forum.arcdroidcnc.com/t/stencil-a-z-0-9/4013/4 "2024-03-15T13:28:35Z")

</div>

@DownStateAg

It’s on the list but is computationally very hard to do so it may take some time to wedge in