# Triangle cutting

**URL:** <https://forum.arcdroidcnc.com/t/triangle-cutting/4374>\
**Category:** General Discussion\
**Created:** [July 29, 2024, 10:25pm UTC](https://forum.arcdroidcnc.com/t/triangle-cutting/4374 "2024-07-29T22:25:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Trainnut](https://avatars.discourse-cdn.com/v4/letter/t/b782af/32.png) [@Trainnut](https://forum.arcdroidcnc.com/u/Trainnut)\
**Post date:** [July 29, 2024, 10:25pm UTC](https://forum.arcdroidcnc.com/t/triangle-cutting/4374/1 "2024-07-29T22:25:49Z")

</div>

Hello, is there a way to make a right angle triangle ,with the triangle function, i can only make equal leg triangles, or am i doing something wrong?

---

<div class="post-metadata">

**Author:** ![bobplewajr](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/bobplewajr/32/156_2.png) [@bobplewajr](https://forum.arcdroidcnc.com/u/bobplewajr)\
**Post date:** [July 30, 2024, 11:42am UTC](https://forum.arcdroidcnc.com/t/triangle-cutting/4374/2 "2024-07-30T11:42:52Z")

</div>

This may help you with right triangles…

> [@Right triangle](https://forum.arcdroidcnc.com/t/right-triangle/3263/2):
>
> @Ballpeen Drawing a right angle triangle is super easy Simply Turn On “Direction snap” and your lines will automatically snap tot the increment of your choosing (default is 15 Degrees) From there just pick three points using the trace tool. PS the Shapes tool for polygons does not create right angle triangles

Good luck! 👍

---

<div class="post-metadata">

**Author:** ![Trainnut](https://avatars.discourse-cdn.com/v4/letter/t/b782af/32.png) [@Trainnut](https://forum.arcdroidcnc.com/u/Trainnut)\
**Post date:** [July 30, 2024, 9:31pm UTC](https://forum.arcdroidcnc.com/t/triangle-cutting/4374/3 "2024-07-30T21:31:15Z")

</div>

Thanks thats helpful