# Unable to find upload post processor to fusion 360 please help

**URL:** <https://forum.arcdroidcnc.com/t/unable-to-find-upload-post-processor-to-fusion-360-please-help/2805>\
**Category:** General Discussion\
**Created:** [May 23, 2023, 3:00pm UTC](https://forum.arcdroidcnc.com/t/unable-to-find-upload-post-processor-to-fusion-360-please-help/2805 "2023-05-23T15:00:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cloaked](https://avatars.discourse-cdn.com/v4/letter/c/65b543/32.png) [@Cloaked](https://forum.arcdroidcnc.com/u/Cloaked)\
**Post date:** [May 23, 2023, 3:00pm UTC](https://forum.arcdroidcnc.com/t/unable-to-find-upload-post-processor-to-fusion-360-please-help/2805/1 "2023-05-23T15:00:07Z")

</div>

hi all me again.  
ive just watched the video about putting a dxf file to usb for arc droid.  
at the end of the video its mentioned that acrdroid post processor software is required.

ive dowloaded the softward but unable to go any further only option windows gives me is to open the file as a word document.  
what am i doing so wrong.  
sorry in advance im new to cad  
thanks .  
jake.

---

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [May 23, 2023, 10:32pm UTC](https://forum.arcdroidcnc.com/t/unable-to-find-upload-post-processor-to-fusion-360-please-help/2805/2 "2023-05-23T22:32:25Z")

</div>

@Cloaked

The Post Processor is not software it is only a file that Fusion uses to translate the fusion file to G-code the ArcDroid understands.

You do not need to “open” it. You simply need to tell Fusion where to find it.  
Start by opening the “Post process” tab in fusion

![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/014343e7905cf1932a1e767195be4b552d35cc67.png)  
Then choose the little folder Icon

 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/16f2706589378cb373d85a8f91873f946a93da40.png)

Then Choose “Local” and “Import” and just point it to wherever you saved the file on you computer.

 ![image](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/1X/2c5e7f2589c57d81e42ad680bee47cc61324c887.png)

the Arcdroid Post will now show up as an option in the post processor window when creating files

Cheers  
AM

---

<div class="post-metadata">

**Author:** ![Jdd](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Jdd](https://forum.arcdroidcnc.com/u/Jdd)\
**Post date:** [July 16, 2023, 1:53am UTC](https://forum.arcdroidcnc.com/t/unable-to-find-upload-post-processor-to-fusion-360-please-help/2805/3 "2023-07-16T01:53:44Z")

</div>

Thank you, I’m going back to square one building a good table and tring to remember I don’t have to know everything all at once. Just %99.99999999 have a good night where did you find this I thought I’ve looked everywhere