# Up and fully running

**URL:** <https://forum.arcdroidcnc.com/t/up-and-fully-running/5073>\
**Category:** General Discussion\
**Created:** [March 6, 2025, 6:16pm UTC](https://forum.arcdroidcnc.com/t/up-and-fully-running/5073 "2025-03-06T18:16:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brad](https://avatars.discourse-cdn.com/v4/letter/b/59ef9b/32.png) [@Brad](https://forum.arcdroidcnc.com/u/Brad)\
**Post date:** [March 6, 2025, 6:16pm UTC](https://forum.arcdroidcnc.com/t/up-and-fully-running/5073/1 "2025-03-06T18:16:19Z")

</div>

I spent some time this morning setting up the X2 table. I just have to say this Arcdroid & X2 table is awesome.What a machine. My first sign. So I thought it will be somewhere on the front of my table. Either the drawer front or on the Downdraft cabinet.

 ![20250306_125347](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/c/c144e29e1bd408a6b22dce36805d1dd6bd498a5f.jpeg)  
 ![20250306_125240](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/9/9e25975180863c8a3c94dc0ba4742c110ca36147.jpeg)  
 ![20250306_212940](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/c/c94f3fcc04b44770a747a4b45fd490d64224e01c.jpeg)  
 ![20250306_213605](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/b/b215722ad51d7d980914b5632cdfe1788aab0758.jpeg)

---

<div class="post-metadata">

**Author:** ![Dieseldog](https://avatars.discourse-cdn.com/v4/letter/d/90db22/32.png) [@Dieseldog](https://forum.arcdroidcnc.com/u/Dieseldog)\
**Post date:** [March 8, 2025, 9:14pm UTC](https://forum.arcdroidcnc.com/t/up-and-fully-running/5073/2 "2025-03-08T21:14:08Z")

</div>

Impressive work! The table looks awesome and so does the sign.

---

<div class="post-metadata">

**Author:** ![Tonyd](https://avatars.discourse-cdn.com/v4/letter/t/e274bd/32.png) [@Tonyd](https://forum.arcdroidcnc.com/u/Tonyd)\
**Post date:** [March 13, 2025, 4:12pm UTC](https://forum.arcdroidcnc.com/t/up-and-fully-running/5073/3 "2025-03-13T16:12:02Z")

</div>

I have the ArcDroid and the X2. Would you possibly give me step by step instructions on how to setup and use it the X2? Is there a video?

---

<div class="post-metadata">

**Author:** ![Brad](https://avatars.discourse-cdn.com/v4/letter/b/59ef9b/32.png) [@Brad](https://forum.arcdroidcnc.com/u/Brad)\
**Post date:** [March 13, 2025, 6:10pm UTC](https://forum.arcdroidcnc.com/t/up-and-fully-running/5073/4 "2025-03-13T18:10:20Z")

</div>

I just made sure my table was square and level. I followed the installation instructions, then made sure I was up to date on firmware. It was pretty easy. Good luck.

---

<div class="post-metadata">

**Author:** ![ChrisRawlins](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@ChrisRawlins](https://forum.arcdroidcnc.com/u/ChrisRawlins)\
**Post date:** [March 14, 2025, 3:46am UTC](https://forum.arcdroidcnc.com/t/up-and-fully-running/5073/5 "2025-03-14T03:46:26Z")

</div>

Andrew Miller explains the X@ & how to use it in this video.

[![](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/3/3a18e086ef62815d669d2ab0ede1893026a4dfca.jpeg "Now cut bigger with the ArcDroid™ X2 Large Cut Indexing System") ](https://www.youtube.com/watch?v=FqXF9z1yxmU)