# Uploading Post processor software for Fusion 360

**URL:** <https://forum.arcdroidcnc.com/t/uploading-post-processor-software-for-fusion-360/1816>\
**Category:** General Discussion\
**Created:** [March 9, 2023, 5:59am UTC](https://forum.arcdroidcnc.com/t/uploading-post-processor-software-for-fusion-360/1816 "2023-03-09T05:59:50Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\
**Post date:** [March 10, 2023, 3:24pm UTC](https://forum.arcdroidcnc.com/t/uploading-post-processor-software-for-fusion-360/1816/4 "2023-03-10T15:24:50Z")

</div>

I posted this over in the Tips And Tricks section a while back  
good way to get yourself started with Fusion

> [@Fusion 360 walk through](https://forum.arcdroidcnc.com/t/fusion-360-walk-through/174):
>
> User Chris Rawlins found this and posted on the old forum. I’m reposting here Very good generic walk through buy a youtuber called Tinwhisperer on how to design and process a part Using fusion 360 [[Video 1 An overview using Fusion 360 CAD & CAM to make a mounting plate to be cut on a CNC plasma.] ](https://www.youtube.com/watch?v=S_4gMsdE7yE)

---

_[View the full topic](https://forum.arcdroidcnc.com/t/uploading-post-processor-software-for-fusion-360/1816)._