# Vcarve pro post processor **URL:** \ **Category:** General Discussion\ **Created:** [April 3, 2023, 3:56pm UTC](https://forum.arcdroidcnc.com/t/vcarve-pro-post-processor/2194 "2023-04-03T15:56:31Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![claude](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@claude](https://forum.arcdroidcnc.com/u/claude)\ **Post date:** [April 3, 2023, 3:56pm UTC](https://forum.arcdroidcnc.com/t/vcarve-pro-post-processor/2194/1 "2023-04-03T15:56:31Z")
does anyone have a post processor for Vcarve pro , not a fan of fusion 360. Already have and avidly use Vcarve pro for my wood working cnc would like to stay with it. any help appreciated ---
**Author:** ![peegee](https://avatars.discourse-cdn.com/v4/letter/p/0ea827/32.png) [@peegee](https://forum.arcdroidcnc.com/u/peegee)\ **Post date:** [October 23, 2023, 11:57pm UTC](https://forum.arcdroidcnc.com/t/vcarve-pro-post-processor/2194/2 "2023-10-23T23:57:50Z")
There is a VCarve post processor listed in Downloads, but after downloading it seems to be the same as the QCad. Anyone else found this? ---
**Author:** ![Andrew](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.arcdroidcnc.com/andrew/32/52_2.png) [@Andrew](https://forum.arcdroidcnc.com/u/Andrew)\ **Post date:** [October 30, 2023, 3:49pm UTC](https://forum.arcdroidcnc.com/t/vcarve-pro-post-processor/2194/3 "2023-10-30T15:49:54Z")
You know what You are right! it got mixed up in the update It has been corrected Cheers AM ---
**Author:** ![FrioRiverMan](https://avatars.discourse-cdn.com/v4/letter/f/35a633/32.png) [@FrioRiverMan](https://forum.arcdroidcnc.com/u/FrioRiverMan)\ **Post date:** [June 14, 2026, 2:53pm UTC](https://forum.arcdroidcnc.com/t/vcarve-pro-post-processor/2194/4 "2026-06-14T14:53:00Z")
Just curious on what fake bit I need to use to make my tool patas for cutting work on my archdroid using Vcare Pro 12.5