# X2 fails to stitch file together

**URL:** <https://forum.arcdroidcnc.com/t/x2-fails-to-stitch-file-together/5617>\
**Category:** General Discussion\
**Created:** [October 29, 2025, 8:19pm UTC](https://forum.arcdroidcnc.com/t/x2-fails-to-stitch-file-together/5617 "2025-10-29T20:19:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shanequance](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@Shanequance](https://forum.arcdroidcnc.com/u/Shanequance)\
**Post date:** [October 29, 2025, 8:19pm UTC](https://forum.arcdroidcnc.com/t/x2-fails-to-stitch-file-together/5617/1 "2025-10-29T20:19:38Z")

</div>

When I save my file, and then use the X2 system to stitch them together, it shows the complete and uninterrupted fil

 ![IMG_20251029_161451427](https://us1.discourse-cdn.com/flex016/uploads/arcdroidcnc/original/2X/9/94abcf7ed786378f7b29a240dd531b2efd7cf0b3.jpeg)

e on the screen. However, when it actually cuts the file, the cuts line up, however it never joins the cuts after I slide my X2 system to finish that other half of the file. See photos please.

Is it a calibration issue, or something I’ve overlooked in setup?