# Zeroing Issues

**URL:** <https://forum.arcdroidcnc.com/t/zeroing-issues/3981>\
**Category:** General Discussion\
**Created:** [March 3, 2024, 1:38am UTC](https://forum.arcdroidcnc.com/t/zeroing-issues/3981 "2024-03-03T01:38:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mic](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@Mic](https://forum.arcdroidcnc.com/u/Mic)\
**Post date:** [March 3, 2024, 1:38am UTC](https://forum.arcdroidcnc.com/t/zeroing-issues/3981/1 "2024-03-03T01:38:37Z")

</div>

Hi All  
Is there a way of making the Arcdroid return to zero, after the cut has finished